Sonocrystallization of polycarbonate melts

In this paper, we showed the simplified continuous process to crystallize the polycarbonate (PC) melts using sonocrystallization which is based on ultrasonic cavitation and ‘hot spot’ theory. High power ultrasonic wave was introduced to crystallize the PC prepolymers which is generally used for solid‐state polymerization (SSP) to obtain the ultra‐high molecular weight PCs. The structure and properties of PC treated with ultrasonic wave such as torque changes and crystallinities were studied. The experimental results showed that ultrasonic wave could improve the crystallinities of PCs and sonication time was proportional to their crystallinity. This is attributed to the decrease of the specific volume and the resulting shrinkage is compensated by a flux of a polymer melt toward the crystallization front. Torque data were collected directly from the Haake internal mixer and crystallinities were evaluated from differential scanning calorimeter (DSC). This process is an environmentally benign process so that no additional solvents or treatments are needed and will be very useful in the conventional solid‐state process which is used industrially. Copyright © 2007 John Wiley & Sons, Ltd.     

The virtual mass of an oblate-ellipsoidal bubble

A semi-analytical solution is presented for the virtual mass coefficient of an oblate-ellipsoidal bubble rising in liquid. The solution was found to be a function of Weber number. The present solution compared well with the numerical solution of the lattice Boltzmann method and the analytical solutions of other investigators.     

Relationships between distributions of chord lengths and distributions of bubble sizes including their statistical parameters

The performance of fluidized beds is strongly influenced by bubble behavior. Among various hydrodynamic properties, bubble size distributions are of prime concern, but in practice, bubble size is not readily measured. When a probe is used to determine bubble size, it intersects a bubble with a chord length other than the largest vertical dimension. The relationships between the size distribution of bubbles in the bed, the size distribution of bubbles touching the probe and the distribution of chord lengths must be resolved for correct interpretation of probe signals. A method for translating statistical parameters, namely mean and standard deviation of chord lengths to mean and standard deviation of bubble sizes, and an approach to infer the size distribution of bubbles touching the probe and the size distribution of bubbles in the bed system by using the distribution of chord lengths measured by a probe in closed form are proposed for the first time.     

Cavitation-induced shock wave behaviour in different liquids

This paper follows our earlier work where a strong high frequency pressure peak has been observed as a consequence of the formation of shock waves due to the collapse of cavitation bubbles in water, excited by an ultrasonic source at 24 kHz. We study here the effects of liquid physical properties on the shock wave characteristics by replacing water as the medium successively with ethanol, glycerol and finally a 1:1 ethanol–water solution. The pressure frequency spectra obtained in our experiments (from more than 1.5 million cavitation collapsing events) show that the expected prominent shockwave pressure peak was barely detected for ethanol and glycerol, particularly at low input powers, but was consistently observed for the 1:1 ethanol–water solution as well as in water, with a slight shift in peak frequency for the solution. We also report two distinct features of shock waves in raising the frequency peak at MHz (inherent) and contributing to the raising of sub-harmonics (periodic). Empirically constructed acoustic pressure maps revealed significantly higher overall pressure amplitudes for the ethanol–water solution than for other liquids. Furthermore, a qualitative analysis revealed that mist-like patterns are developed in ethanol–water solution leading to higher pressures.     

The evolution of cavitation in narrow soft-solid wedge geometry mimicking periodontal and peri-implant pockets

In periodontology and implantology, laser-induced cavitation has not yet been used to treat biofilm-related problems. In this study we have checked how soft tissue affects the evolution of cavitation in a wedge model representing periodontal and peri-implant pocket geometry. One side of the wedge model was composed of PDMS mimicking soft periodontal or peri-implant biological tissue, the other side was composed of glass mimicking hard tooth root or implant surface, which allowed observations of the cavitation dynamics with an ultrafast camera. Different laser pulse modalities, PDMS stiffness, and irrigants were tested for their effect on the evolution of cavitation in the narrow wedge geometry. The PDMS stiffness varied in a range that corresponds to severely inflamed, moderately inflamed, or healthy gingival tissue as determined by a panel of dentists. The results imply that deformation of the soft boundary has a major effect on the Er:YAG laser-induced cavitation. The softer the boundary, the less effective the cavitation. We show that in a stiffer gingival tissues model, photoacoustic energy can be guided and focused at the tip of the wedge model, where it enables generation of secondary cavitation and more effective microstreaming. The secondary cavitation was absent in severely inflamed gingival model tissue, but could be induced with a dual-pulse AutoSWEEPS laser modality. This should in principle increase cleaning efficiency in the narrow geometries such as those found in the periodontal and peri-implant pockets and may lead to more predictable treatment outcomes.     

Manipulation with sound and vibration: A review on the micromanipulation system based on sub-MHz acoustic waves

Manipulation of micro-objects have been playing an essential role in biochemical analysis or clinical diagnostics. Among the diverse technologies for micromanipulation, acoustic methods show the advantages of good biocompatibility, wide tunability, a label-free and contactless manner. Thus, acoustic micromanipulations have been widely exploited in micro-analysis systems. In this article, we reviewed the acoustic micromanipulation systems that were actuated by sub-MHz acoustic waves. In contrast to the high-frequency range, the acoustic microsystems operating at sub-MHz acoustic frequency are more accessible, whose acoustic sources are at low cost and even available from daily acoustic devices (e.g. buzzers, speakers, piezoelectric plates). The broad availability, with the addition of the advantages of acoustic micromanipulation, make sub-MHz microsystems promising for a variety of biomedical applications. Here, we review recent progresses in sub-MHz acoustic micromanipulation technologies, focusing on their applications in biomedical fields. These technologies are based on the basic acoustic phenomenon, such as cavitation, acoustic radiation force, and acoustic streaming. And categorized by their applications, we introduce these systems for mixing, pumping and droplet generation, separation and enrichment, patterning, rotation, propulsion and actuation. The diverse applications of these systems hold great promise for a wide range of enhancements in biomedicines and attract increasing interest for further investigation.     

Dual effects of ultrasound on fabrication of anodic aluminum oxide

Ultrasound has been proven to enhance the mass transfer process and impact the fabrication of anodic aluminum oxide (AAO). However, the different effects of ultrasound propagating in different media make the specific target and process of ultrasound in AAO remain unclear, and the effects of ultrasound on AAO reported in previous studies are contradictory. These uncertainties have greatly limited the application of ultrasonic-assisted anodization (UAA) in practice. In this study, the bubble desorption and mass transfer enhancement effects were decoupled based on an anodizing system with focused ultrasound, such that the dual effects of ultrasound on different targets were distinguished. The results showed that ultrasound has the dual effects on AAO fabrication. Specifically, ultrasound focused on the anode has a nanopore-expansion effect on AAO, leading to a 12.24 % improvement in fabrication efficiency. This was attributed to the promotion of interfacial ion migration through ultrasonic-induced high-frequency vibrational bubble desorption. However, AAO nanopores were observed to shrink when ultrasound was focused on the electrolyte, accompanied by a 25.85 % reduction in fabrication efficiency. The effects of ultrasound on mass transfer through jet cavitation appeared to be the reason for this phenomenon. This study resolved the paradoxical phenomena of UAA in previous studies and is expected to guide AAO application in electrochemistry and surface treatments.     

Transition mechanisms of translational motions of bubbles in an ultrasonic field

The translation behaviors of oscillating bubbles are closely related to the polymerizations and dispersions between them, which are crucial for the ultrasonic cavitation effect. In this study, six types of translational motion of bubbles with a wide range of sizes (2–100 μm) in the R₀₁-R₀₂ plane are investigated. Our results demonstrate that in addition (to the 2nd order harmonic), the 1/2 order subharmonic can change the bubble pairs from the three states of the attraction, stable after attraction, and repulsion to that of the repulsion, coalescence, and attraction, respectively. Furthermore, within the range of the main resonance radius and the 1/2 order subharmonic resonance radius, the chaotic bubble pairs with alternating attractive and repulsive forces appear in the region between the coalescence pairs and stable pairs after attraction. Finally, the corresponding physical mechanisms of the chaotic translational motions are also revealed.     

Ultrasonic devulcanization of waste rubbers: Experimentation and modeling

Continuous ultrasonic devulcanization of ground tire rubber (GRT) and styrene-butadiene rubber (SBR) is considered. Experiments are performed under various processing conditions. Two recipes of SBR with different amounts of polysulfidic linkages are utilized. Gel fraction and crosslink density of devulcanized rubbers are measured and a unique relationship between them is established. Die characteristics with and without imposition of ultrasonic waves are determined. Devulcanized samples are revulcanized and mechanical properties are measured. In some cases, properties of revulcanized SBR samples exceeded those of virgin vulcanizates. This is explained based on the presence of a double network in the revulcanized rubber. A modification of acoustic cavitation and flow modeling of ultrasonic devulcanization of SBR and GRT is proposed using a concept of effective viscosity characterizing the flow of vulcanized particles before devulcanization combined with a shear rate, temperature and gel fraction-dependent viscosity of devulcanized rubber. Velocity, shear rate, pressure, and temperature field along with gel fraction, crosslink density and number of bonds broken are simulated. Predicted data on gel fraction, crosslink density, and pressure using the present modification of the model are found to be closer to experimental data then previously reported.Dedicated to the memory of Professor Tasos C. Papanastasiou